KTM F7103Q3, Setup Instructions

Page: 26 / 37

3 WORK
24
3.14 Installing the front fender
V00341-11
Main work
–
Position the front fender. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
V00340-11
–
Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Finishing work
–
Install the headlight mask with the headlight. ( p. 25)
–
Check the headlight setting. ( p. 25)
3.15 Removing the headlight mask with the headlight
E00355-10
–
Switch off all power consumers and switch off the engine.
–
Detach the brake line and wiring harness from the headlight mask.
–
Release rubber bands  . Slide the headlight mask up and swing it forward.
E00356-10
(All EXC/EXC Six Days models)
–
Detach plug-in connectors

and take off the headlight mask with the head-
light.
E00357-10
(All XC
‑
W/XC
‑
W Six Days models)
–
Detach plug-in connector

and take off the headlight mask with the head-
light.