KTM F5003T1, Setup Instructions

Page: 15 / 23

WORK 3
13
–
Set the clock. ( p. 13)
3.14 Installing the 12-V battery
V00664-11
Main work
–
Mount rubber strap
1
on the battery compartment.
–
Position the 12-V battery in the battery compartment.
Guideline
The terminals of the battery must face upwards.
12-V battery (ETZ-9-BS)
–
Attach rubber strap
1
.
–
Position positive cable
2
and mount and tighten the screw.
–
Position positive terminal cover
3
.
V00663-11
–
Position negative cable
4
; mount and tighten the screw.
Finishing work
–
Mount the battery cover. ( p. 10)
–
Mount the front rider's seat. ( p. 10)
–
Set the clock. ( p. 13)
3.15 Setting the clock
Info
The time is displayed in 24-hour format.
The time must be reset if the 12-V battery was disconnected from the vehicle or the fuse was removed.
Condition
The motorcycle is stationary.
F01455-10
–
Press the MODE button briefly and repeatedly until ODO appears
on the display.
–
Press the
MODE
button and
SET
button simultaneously for 5
seconds.
The time display begins to flash.
Info
The clock can be set in the ODO display for each menu
by keeping the MODE button and SET button pressed
simultaneously.
–
Set the hours display using the MODE button.
–
Set the minutes display using the SET button.