KTM F4175T2 Owner'S Manual Download Page 229

Page: 229 / 242

SUBSTANCES 23

227

Engine oil (SAE 10W/40)

Standard/classification

–

JASO T903 MA2 (

p. 230)

–

SAE (

p. 230) (SAE 10W/40)

Guideline

–

Use only engine oils that comply with the specified standards (see specifications on the container) and that
possess the corresponding properties.

Semi-synthetic engine oil

Recommended supplier
MOTOREX

–

Formula 4T

Super unleaded (ROZ 95/RON 95/PON 91)

Standard/classification

–

DIN EN 228 (ROZ 95/RON 95/PON 91)

Guideline

–

Only use unleaded super fuel that matches or is equivalent to the specified fuel grade.

–

Fuel with an ethanol content of up to 10 % (E10 fuel) is safe to use.

Info

not

use fuel containing methanol (e. g. M15, M85, M100) or more than 10 % ethanol (e. g. E15,

E25, E85, E100).

Summary of Contents for F4175T2



















































































































































































































































Search results

Summary of Contents for F4175T2

Reviews:

Brands by name

Popular brands

KTM F4175T2, Owner'S Manual

Search results

Summary of Contents for F4175T2

Reviews:

Brands by name

Popular brands