KTM F3001U1, Owner'S Manual

Page: 108 / 157

16 ELECTRICAL SYSTEM
106
–
Tighten screw
1
.
16.11 Changing the combination instrument battery
Preparatory work
–
Deactivate the vehicle. ( p. 43)
–
Fold the seat up. ( p. 69)
–
Remove the Powerpack HV. ( p. 108)
–
Mount the protection cap. ( p. 71)
–
Remove the headlight mask with the headlight. ( p. 102)
F02494-10
Main work
–
Remove screws
1
.
–
Pull the combination instrument upward out of the holder.
F02495-10
–
Using a coin, turn protection cap 2 all the way counterclock-
wise and take it off.
–
Remove combination instrument battery
3
.
–
Insert the combination instrument battery with the label facing
outward.
Combination instrument battery (CR 2430) ( p. 139)
–
Check the O-ring of the protection cap for correct seating.
F02496-10
–
Position protection cap
2
and turn all the way clockwise
using a coin.
–
Press any button on the combination instrument.
The combination instrument is activated.
–
Position the combination instrument in the holder.
–
Mount and tighten the screws with washers.
Guideline
Screw, combination
instrument on com-
bination instrument
bracket EJOT DELTA PT
® 45x12-Z
1 Nm (0.7 lbf ft)
Finishing work
–
Install the headlight mask with the headlight. ( p. 102)
–
Install the Powerpack HV. ( p. 109)
–
Lock the seat. ( p. 69)
–
Check the headlight setting. ( p. 105)
–
Set the kilometers or miles. ( p. 27)
–
Set the combination instrument. ( p. 28)
–
Set the clock. ( p. 29)