KTM Chassis 690 SMC, Owner'S Manual

Page: 82 / 186

MAINTENANCE WORK ON CHASSIS AND ENGINE
80
100135-10
–
Check the thickness of the front and rear brake discs in several places to ensure that it
conforms to measurement

.
Info
Wear reduces the thickness of the brake disc in the area

of the brake disc.
Brake discs - wear limit
Front 4.0 mm (0.157 in)
Rear 4.5 mm (0.177 in)
» If the brake disc thickness is less than the specified value:
–
Replace the brake disc.
–
Check the front and rear brake discs for damage, cracks, and deformation.
» If damage, cracks, or deformation are visible on the brake disc:
–
Replace the brake disc.
9.32
Adjusting basic position of handbrake lever
600598-10
–
Adjust the basic setting of the handbrake lever to your hand size by turning adjusting
wheel

.
Info
Pull the brake lever forwards and turn the adjusting wheel.
Do not make any adjustments while riding!