KTM 990 Supermoto R USA 2010, Owner'S Manual

Page: 118 / 220

MAINTENANCE WORK ON FRAME AND ENGINE
116
Mounting the helmet lock on the vehicle
Warning
Danger of accidents Impairment of ride behavior and vehicle operation if a helmet or helmet lock is attached to the vehicle.
–
Do not use the helmet lock for holding a helmet or other objects during the journey. Always remove the helmet lock before start-
ing out.
700561-10
–
Remove the seat. ( p. 115)
–
Position the steel cable from the tool set with one loop on the lug

.
Steel cable (60012015000)
–
Guide the steel cable through the helmet opening.
–
Then position the free loop of the steel cable on the lug.
–
Position the helmet carefully on the side of the vehicle.
–
Mount the seat. ( p. 115)
Removing the battery
x
Warning
Risk of injury
Battery acid and battery gases cause serious cauterization.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep the battery away from sparks or open fire. Charge only in well ventilated rooms.
–
In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least 15
minutes and contact a doctor.