6
CONTROLS
35
400840-01
–
Switch on the ignition by turning the ignition key to the
ON
position.
–
Press the
MODE
button repeatedly until the
TRIP 1
mode is active.
–
Keep the
SET
button pressed.
The
TRIP 1
display is set to
0.0
.
6.12.12 Setting/resetting display TRIP 2
Info
The
TRIP 2
trip counter is always running and counts up to
999.9
.
The trip counter can be used to measure the distance covered during trips or between two refueling stops. After the value
999.9
is
reached, the trip counter starts at
0.0
again.
400841-01
–
Switch on the ignition by turning the ignition key to the
ON
position.
–
Press the
MODE
button repeatedly until the
TRIP 2
mode is active.
–
Keep the
SET
button pressed.
The
TRIP 2
display is set to
0.0
.
Summary of Contents for 990 SUPERMOTO R AUS/UK
