KTM 990 Adventure AUS, Owner'S Manual, Page: 162 / 218

SERVICE WORK ON THE ENGINE
160
16.2
Changing the engine oil and filter, cleaning the oil screens
x
B00119-01
–
Drain engine oil, clean oil screens. x ( p. 160)
–
Install the oil filter. x ( p. 165)
–
Install the left fuel tank. x ( p. 86)
–
Fill up with engine oil. x ( p. 165)
–
Install the underride guard. x ( p. 97)
16.3
Draining engine oil, cleaning oil screens
x
Warning
Danger of scalding Engine oil and gear oil get very hot when the motorcycle is ridden.
–
Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
Drain the engine oil only when the engine is warm.
–
Remove the underride guard. x ( p. 97)
–
Remove the left fuel tank. x ( p. 84)