KTM 990 Adventure AUS/UK Page 75 Owner'S Manual Download

Page: 75 / 216

MAINTENANCE WORK ON FRAME AND ENGINE

Info

Turn clockwise to increase damping, turn counterclockwise to reduce suspension
damping.

9.11

Adjusting the high-speed compression damping of the shock absorber

Danger

Danger of accidents

Disassembly of pressurized parts can lead to injury.

–

The shock absorber is filled with high density nitrogen. Adhere to the description provided. (Your authorized KTM workshop will
be glad to help.)

Info

The high-speed setting can be seen during the fast compression of the shock absorber.

100538-10

–

Turn adjusting screw



clockwise as far as it will go using a socket wrench.

Info

Do not loosen nut



–

Turn back counterclockwise by the number of turns corresponding to the shock
absorber type.

Summary of Contents for 990 Adventure AUS/UK

























































































































































































































Search results

Summary of Contents for 990 Adventure AUS/UK

Reviews:

Related manuals for 990 Adventure AUS/UK

Brands by name

Popular brands

KTM 990 Adventure AUS/UK, Owner'S Manual

Search results

Summary of Contents for 990 Adventure AUS/UK

Reviews:

Related manuals for 990 Adventure AUS/UK

Brands by name

Popular brands