KTM 990 Adventure AUS/UK 2012, Setup Instructions

Page: 6 / 16

2 SETUP
4
201916-10
–
Position the controls on the left half of the handlebar.
Info
Position the holding lug of the switch unit in the drill hole of the handlebar.
–
Position all controls in their exact positions on the handlebar. Tighten all screws.
201917-10
–
Mount speed nuts
2
.
–
Remove the film from the headlight. Position the screen. Mount and tighten the
screws with washers
3
.
The screw heads are countersunk in the washers.
201918-10
–
Mount and tighten the rear mirror on both sides.
–
An assistant holds the motorcycle.
–
Carefully loosen and remove the tensioning belt over the swingarm.
Info
An assistant prevents the motorcycle from falling over.
–
Carefully loosen and remove the tensioning belts around the lower triple clamp.
The vehicle is released at the front.
–
Together with an assistant, take the vehicle off the pallet.
201901-10
–
Mount the reflector.
201919-10
–
Recharge the battery. ( p. 6)
–
Plug in connector
4
.