MAINTENANCE WORK ON CHASSIS AND ENGINE
130
100600-10
–
Pull bulb sockets
out of the tail light.
–
Pull bulbs
out of the sockets.
–
Insert new bulbs into the sockets.
Tail light (WR5W / socket W2.1x9.5d) (
–
Insert the bulb sockets into the tail light.
–
Check the lighting function.
–
Position the tail light. Mount and tighten the nuts with the washers.
Guideline
Nut, tail light
M6
8 Nm (5.9 lbf ft)
9.60
Changing the brake light bulb
Note
Damage to reflector
Reduced luminance.
–
Grease on the bulb will evaporate due to the heat and be deposited on the reflector. Clean the bulb and keep it free of grease before
mounting.
100599-10
–
Remove nuts
at the bottom of the rear fender and pull out the tail light toward the
rear.
Summary of Contents for 990 Adventure 2009
Page 2: ......
