manualshive.com logo in svg

KTM 950 SUPERMOTO 2007, Owner'S Manual, Page: 80 / 94

Share
Download
KTM 950 SUPERMOTO 2007 Owner'S Manual Download Page 80

TECHNICAL SPECIFICATIONS – CHASSIS 

»

CHASSIS

950 SUPERMOTO / R  2007

Frame

tubular chrome-molybdenum-steel space frame 

Fork

WP Suspension – 

U

p 

S

ide 

D

own fork 4860 ROMA

Wheel travel front

200 mm (7.9 in)

Rear suspension

WP Suspension -

P

rogressive 

D

amping 

S

ystem shock absorber 4618 BAVP

Wheel travel rear

210 mm (8.3 in)

Front brake

disk brake, 2 floating perforated brake disks Ø 305 mm (12 in), brake calipers radially bolted

Rear brake

disk brake, perforated brake disk Ø 240 mm (9.4 in), floating brake caliper

Authorized front tires * 

PIRELLI Scorpion Sync 120/70 ZR17 M/C 58W

Air pressure front

road, driver only................................................2.4 bar  (34 psi)
road, with passenger / maximum payload ............2.4 bar  (34 psi)

Authorized rear tires * 

PIRELLI Scorpion Sync 180/55 ZR17 M/C 73W

Air pressure rear

road, driver only................................................2.4 bar  (34 psi)
road, with passenger / maximum payload ............2.6 bar  (37 psi)

Fuel tank capacity

17 liters / 4.5 USgal (950 Supermoto), 14 liters / 3.7 USgal (950 Supermoto R),  4 liters /1 USgal reserve

Gear ratio – rear wheel

17:41

Chain

5/8 x 5/16” X-ring

Lighting

headlight .........................................................H4  12V 60/55W  (socket P43t)
position light front ............................................12V 5W  (socket W2.1x9.5d)
indicator lamps.................................................LED
position light rear..............................................12V 5W  (socket W2.1x9.5d)
stoplight ..........................................................12V 21W  (socket BA15s)
licens plate illumination ....................................12V 5W  (socket W2.1x9.5d)
flasher .............................................................12V 10W  (socket BA15s)

79

* further tire releases are available on the Internet at www.ktm.com

Summary of Contents for 950 SUPERMOTO 2007































































































Reviews:

No comments