11
SERVICE WORK ON THE CHASSIS
48
C00255-01
–
Check the chain sliding guard for wear.
» If the lower edge of the chain pins is in line with or below the chain sliding
guard:
–
Change the chain sliding guard.
x
–
Check the chain sliding guard for tightness.
» If the chain sliding guard is loose:
–
Tighten the chain sliding guard.
Guideline
Remaining screws, chassis
M6
10 Nm
(7.4 lbf ft)
C00256-01
–
Check the chain sliding piece for wear.
» If the lower edge of the chain pins is in line with or below the chain sliding
piece:
–
Change the chain sliding piece.
x
–
Check the chain sliding piece for tightness.
» If the chain sliding piece is loose:
–
Tighten the chain sliding piece.
Guideline
Screw, chain sliding piece
M8
15 Nm
(11.1 lbf ft)
401585-01
–
Check the chain guide for wear.
Info
Wear can be seen on the front of the chain guide.
» If the dark part of the chain guide is worn:
–
Change the chain guide.
x
C00257-01
–
Check the chain guide for tightness.
» If the chain guide is loose:
–
Tighten the chain guide.
Guideline
Remaining screws, chassis
M6
10 Nm
(7.4 lbf ft)
Remaining nuts, chassis
M6
10 Nm
(7.4 lbf ft)
Finishing work
–
Remove the motorcycle from the lift stand. (
