2
SETUP
4
201940-10
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned correctly.
–
Position the handlebar clamps. Mount and tighten the screws evenly.
Guideline
Screw, handlebar clamp
M8
20 Nm
(14.8 lbf ft)
Info
The markings on the handlebar should be at the center of the handlebar
clamps.
Keep the gap widths equal when tightening.
201941-10
–
Position the handlebar cushion and secure with a cable binder.
201942-10
–
Remove screw
2
with the guide from the start number plate.
–
Position the start number plate. Mount and tighten screw
3
.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
Info
Ensure the holding lugs engage in the fender.
–
Position the brake line and guide. Mount and tighten screw
2
.
201943-10
–
Connect the fuel line to the fuel tap.
800042-10
–
Mount the footrests with the springs and pins. Secure the pins using the washers
and cotter pins.
Pliers for footrest spring (58429083000)
