KTM 790 Adventure 2019 Page 174 Owner'S Manual Download

Page: 174 / 359

12 TUNING THE CHASSIS

172

12.7

Adjusting the high-speed compression damping of the shock absorber

Caution

Risk of injury

Parts of the shock absorber will move around if the shock absorber is detached incorrectly.

The shock absorber is filled with highly compressed nitrogen.

–

Please follow the description provided. (Your authorized KTM workshop will be glad to help.)

Info

The effect of the high-speed setting can be seen in fast compression of the shock absorber.

F02026-11

–

Turn adjusting screw

all the way clockwise with a socket

wrench.

Info

Do not loosen fitting

–

Turn counterclockwise by the number of turns corresponding
to the shock absorber type.

Summary of Contents for 790 Adventure 2019








































































































































































































































































































































































Search results

Summary of Contents for 790 Adventure 2019

Reviews:

Related manuals for 790 Adventure 2019

Brands by name

Popular brands

KTM 790 Adventure 2019, Owner'S Manual

Search results

Summary of Contents for 790 Adventure 2019

Reviews:

Related manuals for 790 Adventure 2019

Brands by name

Popular brands