KTM 690 SMC R, Owner'S Manual

Page: 162 / 200

20 TROUBLESHOOTING
160
Faults Possible cause Action
The engine does not turn when the
starter button is pressed Operating error
–
Carry out the start procedure. ( p. 47)
The battery is discharged
–
Recharge the battery. ( p. 117)
–
Check the quiescent current.
Fuse 1 or 2 blown
–
Change the fuses of individual power consumers.
( p. 123)
–
Set the clock. ( p. 32)
Main fuse burned out
–
Change the main fuse. ( p. 120)
No ground connection present
–
Check the ground connection.
Engine turns only if the clutch lever is
drawn The vehicle is in gear
–
Shift gear to neutral.
The vehicle is in gear and the side
stand is folded out
–
Shift gear to neutral.
Engine turns but does not start. Operating error
–
Carry out the start procedure. ( p. 47)
Fuse
3
blown
–
Change the fuses of individual power consumers.
( p. 123)
The plug-in connection of the fuel hose
connection is not connected
–
Connect the plug-in connection of the fuel line.
Defect in fuel injection system
–
Read out the fault memory using the KTM diag-
nostics tool.
Engine has too little power. Air filter is very dirty
–
Remove the air filter. ( p. 76)
–
Install the air filter. ( p. 77)
Fuel screen is very dirty
–
Change fuel screen.
Fuel filter is very dirty
–
Check the fuel pressure.
Defect in fuel injection system
–
Read out the fault memory using the KTM diag-
nostics tool.