11
SERVICE WORK ON THE CHASSIS
73
11.10
Installing the fork protector
S00054-13
–
Position the fork protection on the left fork leg. Mount and tighten screws
1
.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
–
Position the brake line and cable harness. Put the clamp on, mount and tighten
screws
2
.
–
Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
11.11
Removing the seat
601869-10
–
Pull on strap
1
and raise the rear of the seat at the same time.
–
Pull back the seat and lift it off.
