CONTROLS
28
800083-18
–
Switch on the ignition by turning the ignition key to position
ON
.
–
Press the
M
button repeatedly until the
Odo
mode is active.
–
Keep the
M
button and the
S
button pressed simultaneously.
The time display begins to flash.
–
Press the
M
button to set the hour.
–
Press the
S
button to set the minute.
–
Keep the
M
button and the
S
button pressed simultaneously.
The time is set.
5.18
Combination instrument - display ODO
800083-18
In the
Odo
display mode, the total distance traveled is shown in kilometers or miles.
Info
This value is retained, even if the battery is disconnected and/or the fuse blows.
5.19
Combination instrument - setting/resetting TRIP 1
Info
The
TRIP 1
trip counter runs constantly and counts up to
999.9
.
The trip counter can be used to measure the distance covered during trips or between two refueling stops. After the value
999.9
is
reached, the trip counter starts at
0.0
again.
Summary of Contents for 690 Enduro R AUS
