KTM 690 Enduro R 2021, Setup Instructions

Page: 19 / 27

WORK 3
17
D07484-11
–
Mount and tighten screw
1
.
Guideline
Screw, tail section M6x21 6 Nm (4.4 lbf ft)
D07483-11
–
Mount screws
2
with the bushings and tighten.
Guideline
Screw, trim M5x20 2 Nm (1.5 lbf ft)
–
Position the grab handle.
–
Mount and tighten screws
3
.
Guideline
Screw, grab handle M8 10 Nm (7.4 lbf ft)
Finishing work
–
Mount the seat. ( p. 8)
–
Close the fuel tank filler cap. ( p. 12)
3.18 Mounting rear footrest bracket
Info
The operations are the same for the left and right sides.
S00807-10
–
Position the footrest bracket
1
. Mount and tighten
screws
2
.
Guideline
Screw, rear footrest
bracket M8x16 25 Nm (18.4 lbf ft)
3.19 Mounting heel protector
Info
The operations are the same for the left and right sides.