KTM 690 Duke USA, Owner'S Manual

Page: 102 / 182

13 WHEELS, TIRES
100
602567-10
–
Engage the counter bearing of the brake caliper support
A
and swingarm. Carefully lift
the rear wheel into the swingarm and engage the brake disc. Lay the chain on the rear
sprocket and mount the wheel spindle.
–
Mount chain adjuster
2
and nut
3
.
Info
Mount the left and right chain adjusters in the same position.
–
Push the rear wheel forward so that the chain adjusters are in contact with the adjust-
ing screws, and tighten the nut.
Guideline
In order for the rear wheel to be correctly aligned, the markings on the left and right
chain adjusters must be in the same position relative to the reference marks
B
.
Nut, rear wheel spindle M25x1.5 90 Nm
(66.4 lbf ft)
–
Insert wheel speed sensor
4
into the hole. Mount and tighten screw
5
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Operate the foot brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point.
Finishing work
–
Take the motorcycle off of the rear wheel stand. ( p. 70)
–
Check the chain tension. ( p. 75)