KTM 690 DUKE R EU Page 93 Owner'S Manual Download

Page: 93 / 179

BRAKE SYSTEM

Preparatory work

–

Check the rear brake linings. (

p. 91)

M00664-10

Main work

–

Stand the vehicle upright.

–

Remove screw cap



with the washer and membrane



–

Add brake fluid to the

MAX

mark.

Brake fluid DOT 4 / DOT 5.1 (

p. 166)

–

Mount the screw cap with the washer and membrane.

Info

Clean up overflowed or spilt brake fluid immediately with water.

12.11

Checking the rear brake linings

Warning

Danger of accidents

Reduced braking efficiency caused by worn brake linings.

–

Change worn brake linings immediately. (Your authorized KTM workshop will be glad to help.)

Note

Danger of accidents

Reduced braking efficiency caused by damaged brake discs.

–

If the brake linings are not changed in time, the steel brake lining carriers grind on the brake disc. The braking effect is greatly
reduced and the brake discs are destroyed. Check the brake linings regularly.

Summary of Contents for 690 DUKE R EU




















































































































































































Search results

Summary of Contents for 690 DUKE R EU

Reviews:

Related manuals for 690 DUKE R EU

Brands by name

Popular brands

KTM 690 DUKE R EU, Owner'S Manual

Search results

Summary of Contents for 690 DUKE R EU

Reviews:

Related manuals for 690 DUKE R EU

Brands by name

Popular brands