KTM 690 Duke 2018, Setup Instructions

Page: 10 / 20

3 WORK
8
3.4 Installing the battery
V00579-10
Main work
–
Position the battery in the battery holder.
Battery (HTZ12A-BS)
The battery terminals face opposite the direction of travel.
–
Reconnect rubber band
1
.
–
Connect both positive cables
2
to the battery.
Guideline
Screw, battery termi-
nal M6 2 Nm (1.5 lbf ft)
–
Mount positive terminal cover
3
.
V00580-11
–
Connect negative cable 4 to the battery.
Guideline
Screw, battery termi-
nal M6 2 Nm (1.5 lbf ft)
Finishing work
–
Mount the passenger seat. ( p. 6)
–
Set the time and date. ( p. 9)
3.5 Disconnecting the negative cable of the battery
Preparatory work
–
Switch off the ignition by turning the ignition key to the posi-
tion .
–
Remove the passenger seat. ( p. 6)
V00580-10
Main work
–
Disconnect negative cable
1
of the battery.