KTM 65 SX 2012, Owner'S Manual

Page: 66 / 88

MAINTENANCE WORK ON THE ENGINE
64
15.1
Checking the gear oil level
Info
The gear oil level must be checked when the engine is cold.
–
Stand the motorcycle upright on a horizontal surface.
300661-10
–
Remove gear oil level check screw

.
–
Check the gear oil level.
A small amount of gear oil should flow out of the hole.
» If no gear oil flows out:
–
Add gear oil.
x
( p. 65)
–
Mount and tighten the gear oil level check screw.
Guideline
Screw, gear oil level check M6 6 Nm (4.4 lbf ft)
15.2
Changing the gear oil
x
400721-01
–
Drain the gear oil.
x
( p. 64)
400722-01
–
Fill up with gear oil.
x
( p. 65)
15.3
Draining the gear oil
x
Warning
Danger of scalding Engine oil and gear oil get very hot when the motorcycle is ridden.
–
Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
Drain the gear oil only when the engine is warm.
–
Stand the motorcycle on its side stand on a horizontal surface.