KTM 450 XC-W USA 2013, Setup Instructions

Page: 10 / 20

3 WORK
8
3.1 Raising the motorcycle with the lift stand
601620-01
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (54829055000)
The wheels should no longer touch the ground.
–
Secure the motorcycle against falling over.
3.2 Removing the motorcycle from the lift stand
Note
Danger of damage
The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
C00077-01
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press the side stand
1
to the ground with your foot and
lean the motorcycle on it.
Info
When you are riding, the side stand must be folded up and secured with the
rubber band.
3.3 Removing headlight mask with headlight
101401-10
–
Switch off all electrical equipment.
–
Remove screw
1
and take off clamp.
–
Loosen the rubber band
2
. Push up the headlight mask and swing it forwards.
C00124-11
–
Pull out the electric plug connector
3
and remove the headlight mask with the
headlight.