TASKS
5
200148-10
–
Raise the rear of the air filter box lid
2
. At the same time, use your other hand to
press on the carburetor connection boot to kink it at that location. This prevents the
carburetor connection boot from disconnecting from the carburetor.
–
Raise the fender
3
at the rear and remove it.
3.4
Installing the rear fender
200148-11
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Raise the rear of the air filter box lid
1
. At the same time, use your other hand to
press on the carburetor connection boot to kink it at that location. This prevents the
carburetor connection boot from disconnecting from the carburetor.
–
Position the front fender
2
.
–
Fix the air filter box lid in the fender.
200149-11
–
Fit and tighten screws
3
with collar sleeves.
Specification
Remaining screws, chassis
M6
10
Nm (7.4
lbf
ft)
–
Mount the seat (
P. 4)
3.5
Recharging the battery
Warning
Risk of injury
Battery acid and battery gases cause serious cauterization.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep the battery away from sparks or open fire. Charge only in well ventilated rooms.
–
In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least
15 minutes and contact a doctor.
Warning
Environmental hazard
Components and battery acid are a danger to the environment.
–
Do not dispose of batteries in normal household waste. Take defective or used batteries to a battery recycling operator.
Warning
Environmental hazard
Problem materials cause environmental damage.
–
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
