0
0
2
2
0
0
1
1
0
0
3
3
MAINTENANCE ON CHASSIS AND ENGINE
32
Installing the fork protector
b
x
500105-10
ದ
Check parts for damage and wear. Replace damaged or worn parts.
ದ
Position the fork protection on the left fork leg. Mount and tighten screws
b
.
Specification
Remaining screws, chassis
M6
10
b
Nm (7.4
b
lbf
b
ft)
ದ
Position the fork protection on the right fork leg. Mount and tighten screws.
Specification
Remaining screws, chassis
M6
10
b
Nm (7.4
b
lbf
b
ft)
ದ
Install the fork legs.
b
x
(
P. 31)
Removing the lower triple clamp
b
x
ದ
Remove the fork legs.
b
x
(
P. 30)
ದ
Dismount the start number plate (
P. 34)
ದ
Dismount the front fender. (
P. 33)
200389-10
ದ
Remove screws
b
and hang the CDI control unit to the side.
Info
Do not unplug the CDI control unit.
ದ
Loosen screw
b
. Remove nut
b
with screw
b
.
ದ
Remove screw
b
, take off top triple clamp with the handlebar and place it on one
side.
Info
Protect the motorcycle and its attachments from damage by covering them.
Do not bend the cables and lines.
200390-10
ದ
Remove O-ring
b
. Remove protector ring
b
.
ದ
Remove the lower triple clamp with the steering stem.
ದ
Remove the upper steering head bearing.
Installing the lower triple clamp
b
x
200391-01
ದ
Clean the bearing and sealing elements, check for damage, and grease. Replace
damaged or worn parts.
Long-life grease (
P. 84)
ದ
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
Info
Check whether the top steering head seal
b
is correctly positioned.
ದ
Push up protective ring
b
and o-ring
b
.
