TROUBLESHOOTING
167
Faults
Possible cause
Action
Engine turns but does not start.
Spark plug connector or spark plug
defective
Warning
Risk of injury
The ignition system is
under high voltage.
–
Do not touch parts of the ignition sys-
tem. Have work on the ignition sys-
tem carried out in an authorized KTM
workshop.
–
Remove spark plug, connect ignition cable, hold
spark plug to ground (bare metal area on engine),
and try to start the engine.
Guideline
You should see a strong spark on the spark plug.
–
If there is no spark, change the spark plug.
–
If there is still no spark, remove the spark plug
cap from the ignition cable, hold it at the speci-
fied distance from the ground contact, and try to
start the engine.
Guideline
5 mm (0.2 in)
–
If you now have a spark, replace the spark plug
connector.
–
If there is no spark, have the ignition system
checked.
Socket connector of CDI control
device, pulse generator or ignition coil
oxidized
–
Clean socket connector and treat it with contact
spray.
Summary of Contents for 450 SX 2009
