KTM 450 SMR, Owner'S Manual

Page: 38 / 100

11 SERVICE WORK ON THE CHASSIS
36
Finishing work
–
Mount the handlebar cushion.
–
Remove the motorcycle from the lift stand. ( p. 30)
11.13 Greasing the steering head bearing
x
800010-10
–
Remove the lower triple clamp.
x
( p. 33)
–
Install the lower triple clamp.
x
( p. 33)
11.14 Removing the start number plate
L01257-11
–
Remove screw
1
and take off the clamp.
–
Remove screw
2
. Take off the start number plate.
11.15 Installing the start number plate
L01257-10
–
Position the start number plate. Mount and tighten screw
1
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
The holding lugs engage.
–
Position the brake line and clamp. Mount and tighten screw
2
.
11.16 Removing the front fender
L00123-10
–
Remove screws
1
. Remove the front fender.
–
Ensure that the spacers remain in position.