KTM 390 DUKE 2017 Owner'S Manual Download Page 124

Page: 124 / 255

12 SERVICE WORK ON THE CHASSIS

122

12.7

Mounting the passenger seat

H01992-01

–

Attach hooks

on the passenger seat to seat mounting

on the subframe, and lower it at the rear while pushing for-
ward.

–

Press down the passenger seat until it clicks into place.

Warning

Danger of accidents

The passenger seat can come

loose from the anchoring if it is not mounted correctly.

–

After mounting the passenger seat, check that it is
locked correctly by pulling up.

–

Finally, check that the passenger seat is correctly mounted.

12.8

Removing the front rider's seat

Preparatory work

–

Remove the passenger seat. (

p. 121)

Summary of Contents for 390 DUKE 2017
































































































































































































































































Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands

KTM 390 DUKE 2017, Owner'S Manual

Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands