KTM 350 EXC-F 2017, Owner'S Manual

Page: 39 / 129

9 RIDING INSTRUCTIONS
37
9.1 Checks and maintenance measures when preparing for use
Info
Before every trip, check the condition of the vehicle and ensure that it is safe to operate.
The vehicle must be in perfect technical condition when it is being operated.
–
Check the engine oil level. ( p. 102)
–
Check the electrical system.
–
Check the brake fluid level of the front brake. ( p. 74)
–
Check the rear brake fluid level. ( p. 78)
–
Check the front brake linings. ( p. 75)
–
Check the rear brake linings. ( p. 79)
–
Check that the brake system is functioning properly.
–
Check the coolant level. ( p. 96)
–
Check for chain dirt accumulation. ( p. 65)
–
Check the chain, rear sprocket, engine sprocket and chain guide. ( p. 68)
–
Check the chain tension. ( p. 66)
–
Check the tire condition. ( p. 85)
–
Check the tire air pressure. ( p. 85)
–
Check the spoke tension. ( p. 86)
Info
The spoke tension must be checked regularly as incorrect spoke tension will strongly impair riding safety.
–
Clean the dust boots of the fork legs. ( p. 51)
–
Bleed the fork legs. ( p. 50)
–
Check the air filter.
–
Check the settings of all controls and ensure that they can be operated smoothly.
–
Check all screws, nuts, and hose clamps regularly for tightness.
–
Check the fuel level.
9.2 Starting
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation when running the engine.
–
Use an effective exhaust extraction system when starting or running the engine in an enclosed space.
Note
Engine damage High revving speed with a cold engine negatively impacts the lifespan of the engine.
–
Always run the engine warm at a low speed.
401944-10
–
Take the motorcycle off side stand

and secure the side stand with rubber
band  .
–
Shift transmission to neutral.
–
Turn the key in the ignition lock to the position .
–
Turn the emergency OFF switch to the position .
Condition
Ambient temperature: < 20 °C (< 68 °F)
–
Push the cold start button in all the way.