KTM 300 EXC, Repair Manual

Page: 44 / 289

6 FORK, TRIPLE CLAMP
42
201781-10
–
Remove adapter
3
.
–
Remove hub
4
with washers
5
.
Info
It is possible that only one washer or no washer is present.
–
Remove the O-ring from the hub.
201782-10
–
Remove shim stack
6
.
–
Remove washer
7
.
–
Remove O-ring
8
.
6.2.17 Disassembling the seal ring retainer
Info
The steps are identical for both fork legs.
Preparatory work
–
Disassemble the fork legs. ( p. 36)
–
Remove the spring. ( p. 38)
–
Disassemble the cartridge. ( p. 39)
201799-10
Main work
–
Remove pilot bushing support
1
.
–
Remove O-ring
2
and seal ring
3
.
6.2.18 Checking the fork legs
Condition
The fork legs have been disassembled.
200728-10
–
Check the inner tube and axle clamp for damage.
» If there is damage:
–
Change the inner tube.