KTM 300 EXC, Repair Manual

Page: 143 / 289

18 ENGINE
141
18.3.18 Removing the shift shaft
308164-10
–
Push sliding plate
1
away from the shift drum locating unit
2
. Remove shift
shaft
3
with the washer.
18.3.19 Removing the shift drum locating unit
308165-10
–
Remove screw
1
.
–
Push away locking lever
2
from shift drum locating unit
3
and remove the shift
drum locating unit.
–
Relieve tension from the locking lever.
18.3.20 Removing the locking lever
308166-10
–
Remove screw
1
.
–
Take off locking lever
2
with the sleeve and spring.
18.3.21 Removing the rotor
308170-10
–
Hold the rotor with special tool
1
.
Holding spanner, rotor (55129001000) ( p. 274)
–
Remove nut
2
and the washer.
308171-10
–
Mount special tool
3
, apply counterpressure, and pull off the rotor by screwing in
the screw.
Extractor (58012009000) ( p. 274)