SERVICE WORK ON THE CHASSIS 11
69
A00025-10
–
Remove screws
1
with the washers.
–
Pull off the main silencer from the manifold at rubber
sleeve
2
.
11.29
Installing the main silencer
K01229-10
–
Position the main silencer with rubber sleeve
1
.
–
Mount and tighten screws
2
with the washers.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
11.30
Changing the glass fiber yarn filling in the main silencer
Warning
Danger of burns
The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn escape and the damper "burns" out.
Not only is the noise level higher, the performance characteristic changes.
Preparatory work
–
Remove the main silencer. (
