11 SERVICE WORK ON THE CHASSIS
56
K01149-10
Main work
–
Remove screw
1
.
–
Remove screw
2
.
–
Pull off the upper triple clamp with the handlebar and hang to
the side.
Info
Protect the components against damage by covering
them.
Do not kink the cables and lines.
M01117-10
–
Remove O-ring
3
. Remove protective ring
4
.
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
11.10
Installing the lower triple clamp
102146-10
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount the
upper steering head bearing.
–
Check whether upper steering head seal
1
is correctly posi-
tioned.
–
Slide on protective ring
2
and O-ring
3
.
K01150-10
–
Position the upper triple clamp with the handlebar.
–
Mount screw
4
but do not tighten yet.
