KTM 250 EXC Six Days TPI, Owner'S Manual

Page: 46 / 180

9 RIDING INSTRUCTIONS
44
9.1 Checks and maintenance measures when preparing for use
Info
Before every trip, check the condition of the vehicle and ensure that it is safe to operate.
The vehicle must be in perfect technical condition when it is being operated.
H02217-01
–
Check the gear oil level. ( p. 147)
–
Check the electrical system.
–
Check the front brake fluid level. ( p. 100)
–
Check the rear brake fluid level. ( p. 105)
–
Check the front brake linings. ( p. 101)
–
Check the brake linings of the rear brake. ( p. 107)
–
Check that the brake system is functioning properly.
–
Check the coolant level. ( p. 131)
–
Check the chain for dirt. ( p. 87)
–
Check the chain, rear sprocket, engine sprocket, and chain
guide. (
p. 90)
–
Check the chain tension. ( p. 88)
–
Check the tire condition. ( p. 114)
–
Check tire pressure. ( p. 115)
–
Check the spoke tension. ( p. 115)
Info
The spoke tension must be checked regularly as incor-
rect spoke tension will strongly impair riding safety.
–
Clean the dust boots of the fork legs. ( p. 66)
–
Bleed the fork legs. ( p. 65)
–
Check the air filter.
–
Check the settings of all controls and ensure that they can be
operated smoothly.
–
Check all screws, nuts, and hose clamps regularly for tight-
ness.
–
Check the fuel level.
–
Check 2-stroke oil level. ( p. 142)
9.2 Starting the vehicle
Danger
Danger of poisoning
Exhaust gases are toxic and inhaling them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation when running the engine.
–
Use effective exhaust extraction when starting or running the engine in an enclosed space.
Note
Engine damage High revving speed with a cold engine negatively impacts the lifespan of the engine.
–
Always run the engine warm at a low speed.