KTM 250 EXC-F EU, Setup Instructions

Page: 6 / 14

SET
‑
UP
4
800035-10
Warning
Risk of injury
Battery acid and battery gases cause serious cauterization.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep the battery away from sparks or open fire. Charge only in well ven-
tilated rooms.
–
In the event of skin contact, rinse with large amounts of water. If battery
acid gets in the eyes, rinse with water for at least 15 minutes and con-
tact a doctor.
–
Fill the battery.
Info
Read the notes in the battery package.
–
Recharge the battery. ( p. 6)
–
Install the battery. ( p. 7)
–
Install the front fender. ( p. 6)
(250 EXC-F SIX DAYS EU)
–
Mount the engine guard.
Info
Read the accompanying KTM PowerParts installation instructions.
–
Mount the front axle pull.
–
Mount the brake lining support bolt.
–
Mount the fork bleeding set.
–
Mount the handlebar cushion.
600808-10
–
Mount the frame protector.
Info
Read the accompanying KTM PowerParts installation instructions.
400572-01
(250 EXC-F EU)
–
Apply the label.
600810-10
–
Mount and tighten the rear mirror adapter and rear mirror on both sides.
–
Mount the reflector.
–
Position all controls exactly on the handlebar. Tighten all screws.
–
Refuel. ( p. 7)
–
Print out the current PDI form found on KTM DEALER.NET and perform the delivery
inspection.