WORK
7
3.1
Removing headlight mask with headlight
101401-10
–
Switch off all electrical equipment.
–
Remove screw
1
and take off clamp.
–
Loosen the rubber band
2
. Push up the headlight mask and swing it forwards.
C00124-11
–
Pull out the electric plug connector
3
and remove the headlight mask with the
headlight.
3.2
Refitting the headlight mask with the headlight
C00124-10
Main work
–
Connect the electric plug connector
1
.
101401-11
–
Position the headlight mask and fix it with the rubber band
2
.
Info
Ensure that the retaining lugs engage in the fender.
–
Position the brake line and wiring harness. Put the clamp on, mount and tighten
screw
3
.
Subsequent work
–
Check the headlight setting. (
3.3
Checking the headlight setting
0
0
A
A
0
0
B
B
400726-10
–
Position the vehicle upright on a horizontal surface in front of a light wall and make
a mark at the height of the center of the low beam headlight.
–
Make another mark a distance
B
under the first mark.
Guideline
Distance
B
5 cm (2 in)
–
Position the vehicle vertically a distance
A
away from the wall.
Guideline
Distance
A
5 m (16 ft)
–
The rider now sits down on the motorcycle.
–
Switch on the low beam.
Summary of Contents for 250 EXC-F AUS 2012
Page 2: ......
