KTM 2015 RC 390 ASIA Page 80 Owner'S Manual Download

Page: 80 / 196

SERVICE WORK ON THE CHASSIS

12.1

Raising the motorcycle with the rear wheel stand

Note

Danger of damage

The parked vehicle may roll away or fall over.

–

Always place the vehicle on a firm and even surface.

L02255-01

–

Mount the supports of the wheel stand.

–

Insert the adapter in the rear wheel stand.

Bushing kit for lifting gear (90229955044)
Universal V adapter (61029955244)
Rear wheel stand (61029055400)

–

Stand the motorcycle upright, align the lifting gear with the swingarm and the adapters,
and lift the motorcycle.

12.2

Taking the motorcycle off of the rear wheel stand

Note

Danger of damage

The parked vehicle may roll away or fall over.

–

Always place the vehicle on a firm and even surface.

Summary of Contents for 2015 RC 390 ASIA





































































































































































































Search results

Summary of Contents for 2015 RC 390 ASIA

Reviews:

Related manuals for 2015 RC 390 ASIA

Brands by name

Popular brands

KTM 2015 RC 390 ASIA, Owner'S Manual

Search results

Summary of Contents for 2015 RC 390 ASIA

Reviews:

Related manuals for 2015 RC 390 ASIA

Brands by name

Popular brands