11
SERVICE WORK ON THE CHASSIS
47
601336-10
–
Fix handlebar
4
onto the instrument support with cable binders
5
.
–
Loosen screws
6
and
7
.
601336-11
–
Loosen nut
8
and screw
9
.
–
Retighten nut
8
.
Guideline
Nut, upper steering head
M20x1
12 Nm (8.9 lbf ft)
–
Lock screw
9
and nut
8
.
Guideline
Screw, top steering head
M20x1
12 Nm (8.9 lbf ft)
601336-12
–
Tighten screw
7
.
Guideline
Screw, top steering stem
M8
20 Nm
(14.8 lbf ft)
–
Tighten screws
6
.
Guideline
Screw, top triple clamp
M8
17 Nm
(12.5 lbf ft)
601337-10
–
Position steering damper
3
. Mount and tighten screws
2
.
Guideline
Screw, steering damper
M6
15 Nm
(11.1 lbf ft)
–
Remove the cable binders and place the handlebar onto the handlebar clamp base.
–
Mount the holding plate with the handlebar clamps and position the handlebar.
Mount and tighten screws
1
.
Guideline
Screw, handlebar clamp
M8
16 Nm
(11.8 lbf ft)
11.14
Greasing the steering head bearing
x
800010-10
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
