11
SERVICE WORK ON THE CHASSIS
44
601344-10
–
Fix handlebar
5
onto the instrument support with cable binders
6
.
601343-10
–
Loosen screws
7
and
8
.
–
Remove screw
9
and secure against falling out under triple clamp
bk
.
601390-10
–
Remove O-ring
bl
. Remove protective ring
bm
and take off the seal ring beneath it.
–
Take out the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
11.11
Installing the lower triple clamp
x
401211-10
Main work
–
Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
–
Check whether the top steering head seal
1
is correctly positioned.
–
Slide on protective ring
2
and O-ring
3
.
601383-10
–
Position the upper triple clamp.
–
Mount nut
4
with screw
5
but do not tighten yet.
