KTM 2013 1190 Adventure R Owner'S Manual Download Page 79 | Manualshive

Page: 79 / 213

background image

10

RIDING INSTRUCTIONS

77

Info

Very important messages are stored in the

"Warnings"

menu.

–

If the icy road symbol

appears in the combination instrument, the roads may be icy.

Adjust your speed to the road conditions.

10.5

Applying the brakes

Warning

Danger of accidents

Reduced braking efficiency due to a wet or dirty brake system.

–

Clean or dry a dirty or wet brake system by riding and braking gently.

Warning

Danger of accidents

Reduced braking efficiency caused by spongy pressure point of front or rear brake.

–

Check the brake system and do not continue riding. (Your authorized KTM workshop will be glad to help.)

Warning

Danger of accidents

Failure of brake system.

–

If the foot brake lever is not released, the brake linings drag continuously. The rear brake may fail due to overheating. Take your
foot off the foot brake lever when you are not braking.

Warning

Danger of accidents

Longer stopping distance due to higher overall weight.

–

Take the longer stopping distance into account when carrying a passenger and baggage.

Warning

Danger of accidents

Delayed brake action on salted roads.

–

There may be salt deposits on the brake discs. In order to restore the normal braking efficiency, you will need to remove the
deposits from the discs by carefully applying the brakes.

«
...
77
78
79
80
81
...
»

Summary of Contents for 2013 1190 Adventure R






















































































































































































































Reviews:

No comments

Related manuals for 2013 1190 Adventure R

Brand: Braaap Pages: 40

Brand: Honda Pages: 150

2016 Empulse TT

Brand: Victory Motorcycles Pages: 138

6513515 00 22-00-40

Brand: hepco & becker Pages: 7

Brand: SHERCO Pages: 76

KODIAK YFM70KDXM

Brand: Yamaha Pages: 180

Brand: Yamaha Pages: 156

RAPTOR 700R 2022

Brand: Yamaha Pages: 160

Brand: Yamaha Pages: 108

Brand: Yamaha Pages: 114

Brand: Yamaha Pages: 168

Brand: Yamaha Pages: 497

Brand: Yamaha Pages: 704

Brand: Yamaha Pages: 84

Brand: LAS Pages: 22

Brand: R&G Pages: 9

BLITZ 9-13 Visor

Brand: Fubag Pages: 17

Brand: CyClone Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands