CONTROLS
16
5.22
Adjusting the speedometer functions
Info
When the vehicle is delivered, only the
SPEED/H
and
SPEED/ODO
display modes are activated.
Condition
The motorcycle is stationary.
400318-01
–
Press the button
briefly and repeatedly until
H
appears at the bottom right of the
display.
–
Press the button
for 3 - 5 seconds.
The Setup menu is displayed and the activated functions are shown.
–
Change to the desired function by pressing the button
briefly.
The selected function flashes.
Activating a function
–
Press the button .
The symbol remains on the screen and the display changes to the next
function.
Deactivating the function
–
Press the button .
The symbol on the screen goes out and the display changes to the next
function.
–
All desired functions are activated or deactivated accordingly.
–
Press the button
for 3 - 5 seconds.
The settings are stored and the Setup menu is closed.
Info
If no button is pressed for 20 seconds, or if a pulse arrives from the wheel
speed sensor, the settings are stored automatically and the Setup menu is
closed.
5.23
Querying lap time
Info
This function can be called up only if lap times are measured.
Condition
The motorcycle is stationary.
400321-01
–
Press the button
briefly and repeatedly until
LAP
appears at the bottom right of
the display.
–
Press the button
briefly.
LAP 1
appears on the left side of the display.
–
Laps 1-10 can be displayed by pressing the button .
–
The button
has no function.
–
Press the button
briefly.
Next display mode
Info
If an impulse is received from the wheel speed sensor, the left side of the
display changes back to the
SPEED
mode.
