MAINTENANCE WORK ON FRAME AND ENGINE
61
9.3
Jacking up motorcycle at the rear
Note
Danger of damage
The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
B00175-01
–
Insert the work stand adapter in the rear of the work stand.
Work stand adapter (61029055120)
Work stand rear (61029055100)
–
Stand the motorcycle upright, align the work stand to the link fork and the adapters,
and jack up the motorcycle.
9.4
Taking the rear from the workstand
Note
Danger of damage
The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
–
Secure the motorcycle against falling over.
–
Remove the work stand from the rear and lean the vehicle on the side stand.