MAINTENANCE WORK ON FRAME AND ENGINE
105
0
0
3
3
0
0
2
2
0
0
2
2
0
0
4
4
0
0
1
1
0
0
1
1
B00238-10
–
Remove the four screws
.
Info
The required parts are included.
–
If needed, position spacers
of the same length between seat
and seat support
.
–
Mount and tighten screws
of a suitable length.
Guideline
Remaining chassis screws
M6
10 Nm (7.4 lbf ft)
Condition
Without spacer
Use an M6x16 screw
Condition
Spacer: 7 mm (0.28 in)
Use an M6x20 screw
Condition
Spacer: 15 mm (0.59 in)
Use an M6x30 screw
–
Mount the seat. (
9.47
Mounting the helmet lock on the vehicle
Warning
Danger of accidents
Impairment of ride behavior and vehicle operation if a helmet or helmet lock is attached to the vehicle.
–
Do not use the helmet lock for holding a helmet or other objects during the journey. Always remove the helmet lock before start-
ing out.
