MAINTENANCE WORK ON FRAME AND ENGINE
159
700315-01
–
Push the rear wheel as far forward as possible and place the chain on the rear sprocket.
–
Pull the rear wheel back and insert the axle.
700316-01
–
Place the chain adjuster
on the tensioning screw.
–
Position the chain adjuster
and place it on the tensioning screw.
–
Tighten nut
.
Guideline
In order for the rear wheel to be correctly aligned, the markings on the left and right
chain adjusters must be in the same position relative to the reference marks
.
Nut, rear wheel spindle
M25x1.5
90 Nm
(66.4 lbf ft)
Thread greased
–
Operate the foot brake lever repeatedly until the brake linings press up against the
brake disc and there is a pressure point.
–
Take the rear from the work stand. (
–
Check the chain tension. (
Summary of Contents for 2010 1190 RC8
