MAINTENANCE WORK ON CHASSIS AND ENGINE
70
8.87
Installing the oil filter
x
600089-10
–
Insert the oil filter
.
–
Oil the O-ring of the oil filter cover and mount it with the oil filter cover
.
600086-10
–
Mount and tighten screws
.
Guideline
Screw, oil filter cover
M5
6 Nm (4.4 lbf ft)
–
Connect the plug
.
600085-10
–
Insert the oil filter
.
–
Oil the O-ring of the oil filter cover and mount it with the oil filter cover
.
600083-11
–
Mount and tighten screws
.
Guideline
Screw, oil filter cover
M5
6 Nm (4.4 lbf ft)
–
Install the fuel tank. (
8.88
Filling up with engine oil
x
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
600060-11
–
Remove the screw cap
on the clutch cover and fill up with engine oil.
Engine oil
2.20 l (2.32 qt.)
Engine oil (SAE 10W/60)
(00062010035) (
Engine oil (SAE 20W/60) (
–
Mount and tighten screw cap
.
Danger
Danger of poisoning
Exhaust gases are poisonous and can result in uncon-
sciousness and/or death.
–
When running the engine, always make sure there is sufficient venti-
lation, and do not start or run the engine in a closed space without an
effective exhaust extraction system.
–
Start the engine and check that it is oil-tight.
Summary of Contents for 2009 690 Rally Factory Replica
Page 1: ...OWNER S MANUAL 2009 690 Rally Factory Replica ART NO 3211361en...
Page 2: ......
Page 87: ...85...
Page 91: ...WIRING DIAGRAM 89...