MAINTENANCE WORK ON CHASSIS AND ENGINE
69
8.86
Cleaning the oil screens
x
Warning
Danger of scalding
Engine oil and gear oil get very hot when the motocycle is driven.
–
Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under cold water immediately.
Warning
Environmental hazard
Problem materials cause environmental damage.
–
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
–
Place a suitable container under the engine.
600077-10
–
Remove plug
with oil screen
and O-ring.
600079-10
–
Remove plug
with oil screen
and O-ring.
–
Completely drain the remaining engine oil.
–
Thoroughly clean parts and sealing areas.
600079-11
–
Fit and tighten plug
with oil screen
and O-ring.
Guideline
Plug, oil screen
M20x1.5
15 Nm
(11.1 lbf ft)
Info
Plugs
and
and oil screens
and
are identical.
600077-10
–
Fit and tighten plug
with oil screen
and O-ring.
Guideline
Plug, oil screen
M20x1.5
15 Nm
(11.1 lbf ft)
Summary of Contents for 2009 690 Rally Factory Replica
Page 1: ...OWNER S MANUAL 2009 690 Rally Factory Replica ART NO 3211361en...
Page 2: ......
Page 87: ...85...
Page 91: ...WIRING DIAGRAM 89...