KTM 200 DUKE 2021, Owner'S Manual

Page: 85 / 119

COOLING SYSTEM 16
83
G05016-11
–
Stand the motorcycle upright on a horizontal surface.
–
Remove the cap of the compensating tank
1
.
–
Check the coolant antifreeze.
−
25 …
−
45 °C (
−
13 …
−
49 °F)
» If the antifreeze in the coolant does not match the speci-
fied value:
–
Correct the coolant antifreeze.
–
Check the coolant level in the compensating tank.
The coolant level must be between
MIN
and
MAX
.
» If the coolant level does not match the specified value:
–
Correct the coolant level.
Coolant ( p. 107)
–
Mount the cap of the compensating tank.
G05017-10
–
Remove radiator cap
2
.
–
Check the coolant antifreeze.
−
25 …
−
45 °C (
−
13 …
−
49 °F)
» If the antifreeze in the coolant does not match the speci-
fied value:
–
Correct the coolant antifreeze.
–
Check the coolant level in the radiator.
The radiator must be completely filled.
» If the coolant level does not match the specified value:
–
Correct the coolant level and find out the cause of the
loss.
Coolant ( p. 107)
» If you had to add more coolant than the specified amount:
> 0.20 l (> 0.21 qt.)
–
Fill/bleed the cooling system. ( p. 84)
–
Mount the radiator cap.
16.4 Draining the coolant
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or other cooling system components if the engine or the
cooling system are at operating temperature.
–
Allow the cooling system and the engine to cool down before you open the radiator, the radiator hoses
or other components of the cooling system.
–
In the event of scalding, rinse the area affected immediately with lukewarm water.