KTM 1290 Super Duke R, Setup Instructions

Page: 12 / 24

3 WORK
10
S03937-10
–
Position the positive cable and mount and tighten the screw.
Guideline
Screw, battery termi-
nal M6 4.5 Nm
(3.32 lbf ft)
–
Mount positive terminal cover
4
.
–
Position negative cable
5
and mount and tighten the screw.
Guideline
Screw, battery termi-
nal M6 4.5 Nm
(3.32 lbf ft)
–
Position control unit
6
.
Finishing work
–
Mount the front rider's seat. ( p. 8)
–
Mount the passenger seat. ( p. 7)
–
Set time and date.
3.7 Disconnecting the negative cable of the 12-V battery
Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
–
Keep 12 V batteries out of the reach of children.
–
Wear suitable protective clothing and safety glasses.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks or open flames away from the 12 V battery.
–
Only charge 12 V batteries in well-ventilated rooms.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes with water for at least 15 minutes and consult a doctor immediately if battery acid and
battery gases get into the eyes.
Caution
Danger of accidents Electronic components and safety devices will be damaged if the 12-V battery is dis-
charged or missing.
If the 12-V battery is discharged or defective, malfunctions in the vehicle electronics can occur, espe-
cially when starting.
–
Never operate the vehicle with a discharged 12-V battery or without a 12-V battery.
Preparatory work
–
Remove the passenger seat. ( p. 7)
–
Remove the front rider's seat. ( p. 7)
S04104-10
Main work
–
Remove control unit
1
and hang to the side.
–
Disconnect negative cable
2
from the 12-V battery.