KTM 1290 SUPER ADVENTURE R 2018 Owner'S Manual Download

Page: 190 / 360

13 SERVICE WORK ON THE CHASSIS

188

13.5

Checking for chain dirt

400678-01

–

Check the chain for coarse dirt accumulation.
» If the chain is very dirty:

–

Clean the chain. (

p. 188)

13.6

Cleaning the chain

Warning

Danger of accidents

Oil or grease on the tires reduces the road grip.

–

Remove the lubricant from the tires using a suitable cleaning agent.

Warning

Danger of accidents

Oil or grease on the brake discs reduces the braking effect.

–

Always keep the brake discs free of oil and grease.

–

Clean the brake discs with brake cleaner when necessary.

Summary of Contents for 1290 SUPER ADVENTURE R 2018









































































































































































































































































































































































Search results

Summary of Contents for 1290 SUPER ADVENTURE R 2018

Reviews:

Related manuals for 1290 SUPER ADVENTURE R 2018

Brands by name

Popular brands

KTM 1290 SUPER ADVENTURE R 2018, Owner'S Manual

Search results

Summary of Contents for 1290 SUPER ADVENTURE R 2018

Reviews:

Related manuals for 1290 SUPER ADVENTURE R 2018

Brands by name

Popular brands